
It's an electronically controlled unit that allows you to create 256 recall-able preset tones (it also comes with some of its own factory presets). Lots of EQ control is a given, with multi-band and parametrics galore; but one of its nicest features is that it's actually a "dual" preamp - your signal passes through (at your option) 1 or 2 onboard circuits: a solid-state preamp as well as a tube-based preamp. So you can combine those two characters to create a very unique blend. And the tube preamp also has overdrive, so that adds to the sonic stew.
Also quite useful (essential, in my case): dual effects loops, which are switchable within your presets. It also has a built-in chorus effect and built-in compressor, both useful tools for bassists.
It also features Bi-Ampable outputs (alongside a standard full-range output) which I used when running the full rig with both cabinets. When I'd play smaller rooms, I'd bring just the 2x10 and run full-range through that.
The ultimate key, though, was that the preamp is MIDI-controllable. That means that I could use a MIDI floor pedal to choose between presets on the MB1, either between songs or mid-song, to change the sound that I was playing. ADA even made a simple pedal that worked well, but my Ground Control pedal was much more advanced (read about that in a future post.) So whether I needed a straight-ahead bass sound, a distorted grinding tone, a chorus-laden tubey sound, or one of many others, I had to but step on my pedal. And different presets used various effects, too - some used the effects loops, some bypassed them. So already I have lots of tonal flexibility, and I haven't even delved into the many other pieces of gear in the rack.
Next issue: Various Bass Effects Units in the Rig From Hell
No comments:
Post a Comment